Maintaining Your Bedliner

Maintaining Your Bedliner

Find your nearest LINE-X Store.

View Service Information for Automotive

Read more Articles on Automotive

Table of Contents

    To ensure your LINE-X bedliner performs to the highest standards, allow it to fully cure and keep it clean.

    • WHEN YOU PICK UP YOUR TRUCK FROM YOUR LOCAL LINE-X, YOUR BEDLINER IS 80% CURED. YOU ARE IMMEDIATELY READY FOR LIGHT DUTY USE.
    • WAIT 24 HOURS BEFORE HAULING ROCKS, RUBBLE OR OTHER HEAVY OBJECTS. AT THAT TIME YOUR BEDLINER WILL BE FULLY CURED.
    • LINE-X IS EASY TO CLEAN. YOU CAN USE SOAP, WATER AND A STIFF BRISTLE BRUSH TO REMOVE DIRT AND DEBRIS.
    • WHEN USING A PRESSURE WASHER, MAKE SURE THE SPRAY IS SET IN A WIDE FAN PATTERN UNDER 1000 PSI. LINE-X IS SAFE TO SEND THROUGH A CAR WASH.
    • CLEAN UP CHEMICAL SPILLS IMMEDIATELY. WHILE MOST CORROSIVE AGENTS WILL NOT DAMAGE THE INTEGRITY OF YOUR BEDLINER, CHEMICALS LIKE CHLORINE MAY BLEACH THE SURFACE IF LEFT ON THE BEDLINER FOR AN EXTENDED PERIOD OF TIME.

    All LINE-X Bedliners are protected by a Lifetime Warranty. If you have a problem, please visit your local LINE-X. While you’re here, check out our other automotive coatings available at many LINE-X Australia locations.

    WA: Welshpool

    Shop 12/108 Welshpool Rd Welshpool WA, 6106

    WA: Kelmscott

    51-57 Brant Road Kelmscott, WA, 6111 Australia

    WA: Bunbury

    3 Rose Street Bunbury, WA, 6230 Australia

    VIC: Mildura

    56 The Crescent Mildura, VIC, 3500 Australia

    SA: Kilburn

    428 Churchill Road Kilburn, SA, 5084 Australia

    QLD: Geebung

    113 Granite Street Geebung, QLD, 4034 Australia

    QLD: Central Queensland

    5 McLaughlin Street North Rockhampton, QLD, 4701 Australia

    NSW: Sydney Inner-West

    Unit 1/68-72 Derby Street Silverwater, NSW, 2128 Australia

    ACT: Canberra

    Canberra, ACT, Australia